Wrest Pins: 4.0, 4.2 and 4.5 mm

These Wrest Pins are tuning pins used in historical keyboard instruments like clavichords, virginals, and harpsichords.

Wrest Pins 4.2 mm (.0163") - Mildly tapered non threaded old style tuning pins of a diameter 0.163" (4.2 mm) and length 2" (50 mm) as used in clavichords, virginals and harpsichords, available blued or bright steel, with and without hole. The flat part is 3/4" (19 mm) long, the taper is 5/8" (15 mm) long to a diameter of .153" ± .003", slightly chamfered tip. Use tuning keys #8014, 80140, 80141, 80146, 8015.

Wrest Pins 4.0 and 4.5 mm - Cylindrical (non-tapered), non threaded old style tuning pins of a diameters 4.0 and 4.5 mm and length 2" (50 mm) as used in clavichords, virginals and harpsichords, available in black oxide or bright steel, with hole, chamfered at end. If not in stock, available as SPECIAL ORDER - allow 4 weeks.

Use tuning keys #8014, 80140, 80142, 80146, 8015 for 4.0 mm
Use #80141, 80142, 80143, 80151 for 4.5mm 4.2 mm Tapered and 4.0 and 4.5 mm Cylindrical Wrest Pins (non threaded)

4.2 mm Tapered and 4.0 and 4.5 mm Cylindrical Wrest Pins (non threaded)

Description Cat No.
Bright
Cat No.
Blued/Black
NetPrice
4.2 x 50mm Tapered Wrest Pins, no hole      
each #1344 #1346 $0.80
package of 100 #13450 #13470 $75.00
package of 200 #13452 #13472 $140.00
package of 500 #1345 #1347 $325.00
       
4.2 x 50mm Cylindrical Wrest Pins, no hole      
each #1344-42   $0.50 
package of 100 #1345-42   $45.00
       
4.2 x 50mm Tapered Wrest Pins w/hole      
each #1329 #1330 $1.65
package of 100 #13290 #13300 $155.00
package of 200 #13292 #13302 $300.00
       
4.0 x 50mm Cylindrical Wrest Pins w/hole
IF SPECIAL ORDER - allow 4 weeks
     
each #1344-40 #1346-40 NET $1.70
package of 100 #13450-40 #13470-40 NET $160.00
package of 200 #13452-40 #13472-40 NET $310.00
       
4.5 x 50mm Cylindrical Wrest Pins w/hole
IF SPECIAL ORDER - allow 4 weeks
     
each #1344-45 #1346-45 NET $1.70
package of 100 #13450-45 #13470-45 NET $160.00
package of 200 #13452-45 #13472-45 NET $310.00
       

Wrest Pins: 5.0 and 5.5 mm

Wrest Pins 5.0 and 5.5 mm - Cylindrical (non-tapered) old style tuning pins of a diameters 5.0 and 5.5 mm and length 2" (50 mm) as used in early fortepianos, available in black oxide or bright steel, with hole, chamfered at end, non threaded. If not in stock, available as SPECIAL ORDER - allow 4 weeks. Use tuning keys #80141, 80143, 80151 or #80145, 80147 for 5 mm. Use tuning keys #80145, 80147 for 5.5 mm.

Threaded 5.5 mm Wrest Pins - Old style tuning pins similar to the above, but threaded like zither pins, used in early fortepianos.
Use tuning keys #80145, 80147. Special Purchase - Close-out!

5.0 and 5.5 mm Cylindrical Wrest Pins (non threaded) 5.5 mm Cylindrical Threaded Wrest Pins

Description Cat No
Bright
Cat No
Black
NetPrice
5.0 x 50mm Cylindrical Wrest Pins w/hole
IF SPECIAL ORDER - allow 4 weeks
     
each #1344-50 #1346-50 NET $1.75
package of 100 #13450-50 #13470-50 NET $165.00
package of 200 #13452-50 #13472-50 NET $320.00
       
5.0 x 50mm Cylindrical Wrest Pins w/hole
IF SPECIAL ORDER - allow 4 weeks
     
each #1344-55 #1346-55 NET $1.75
package of 100 #13450-55 #13470-55 NET $165.00
package of 200 #13452-55 #13472-55 NET $320.00
       
5.5 x 50mm Threaded Cylindrical Wrest Pins w/hole
SPECIAL PURCHASE - close-out
     
each #13481-55 #13491-55   $1.50
package of 100 #13480-55 #13490-55 $140.00
package of 200 #13482-55 #13492-55 sold out $260.00

Wrest Pins: 3.3 and 3.5 mm

These Wrest Pins are tuning pins used in smaller keyboard instruments like clavichords, virginals, and the 4' rank of harpsichords.

Wrest Pins 3.3 mm (.0130") - Thin mildly tapered, non threaded old style tuning pins of a diameter 0.130" (3.3 mm) and length 2" (50 mm) as used in some clavichords and the 4' register of harpsichords, available blued or bright steel, with and without hole. The flat part is 3/4" (19 mm) long, the taper is 5/8" (15 mm) long to a diameter of .120" ± .003", slightly chamfered tip. Use tuning keys #8014, 80140, 80142, 80146, 8015.

Wrest Pins 3.5 mm (.0138") - Thin cylindrical (non-tapered), non threaded old style tuning pins of a diameter 0.138" (3.5 mm) and length 2" (50 mm) as used in some clavichords and for the 4' of harpsichords, available in black oxide or bright steel, with hole, chamfered at end. If not in stock, available as SPECIAL ORDER - allow 4 weeks Use tuning keys #8014, 80140, 80142, 80146, 8015.

3.3 Tapered and 3.5 mm Cylindrical Wrest Pins (non threaded)

Description Cat No.
Bright
Cat No.
Blued/Black
NetPrice
3.3 x 50mm Tapered Wrest Pins, no hole      
each #1340 #1342 $0.80
package of 100 #13410 #13430 $75.00
package of 200 #13412 #13432 $140.00
package of 500 #1341 #1343 $325.00
       
3.3 x 50mm Tapered Wrest Pins w/hole      
each  #1327  #1328 $1.65
package of 100 #13270 #13280 $160.00
package of 200 #13272 #13282 $300.00
       
3.5 x 50mm Cylindrical Wrest Pins w/hole
IF SPECIAL ORDER - allow 4 weeks
     
each  #1340-35  #1342-35 NET $1.70
package of 100 #13410-35 #13430-35 NET $160.00
package of 200 #13412-35 #13432-35 NET $310.00

Wrest Pins: 6.0 and 6.35 mm - Threaded

Threaded Wrest Pins 6.0 and 6.35 mm - Cylindrical (non-tapered), threaded old style tuning pins of a diameters 6,0 and 6,35 mm and length 2" (50 mm) as used in 19th century fortepianos, square pianos and pianos available in black oxide or bright steel, with hole, chamfered at end. If not in stock, available as SPECIAL ORDER - allow 4 weeks.

Use tuning keys #80145, 80147.

6.0 and 6.35 mm Cylindrical Threaded Wrest Pins

Description Cat No.
Bright
Cat No.
Black
NetPrice
6.0 x 50mm Cylindrical Threaded Wrest Pins w/hole
IF SPECIAL ORDER - allow 4 weeks
     
each #13481-60 #13491-60 NET $2.30
package of 100 #13480-60 #13490-60 NET $210.00
package of 200 #13482-60 #13492-60 NET $390.00
       
6.35 x 50mm Threaded Cylindrical Wrest Pins w/hole
IF SPECIAL ORDER - allow 4 weeks
6.35mm Bright Threaded Wrest Pins are in stock
     
each #13481-63 #13491-63 NET $2.40
package of 100 #13480-63 #13490-63 NET $215.00
package of 200 #13482-63 #13492-63 NET $400.00