Pin Setters

Tools Home

Tuning Aids

Regulating Tools

Tuning Hammers

Punches & Setters

Files & Scrapers

Pin Setters

8072/3 Bridge Pin Setters

has a steel shaft mounted in a wooden handle with a hole at the end that fits over .040” or .050” bridge pins. It is used to push bridge pins into the bridge, especially useful for back pinning.

8074/5 Hitch Pin Setter

is a punch tapered at one end with a hole that fits over .072" (small) or .096" (large) hitch pins. It is used to drive hitch pins into the pre-drilled hitch pin rail with a hammer without the danger of hitting the case with the hammer handle or damaging the pin.

8070/1 Bending Tool
is used to bend back hitch pins. The two sided model will handle both .072” and .096” hitch pins. The one sided model will handle the .072” pins. They have hardened tips.

8085 Center Punch
has a brass body with a hardened pointed spring loaded steel punch. It is used to mark locations of drill holes.

Pin Setters

Catalog No	Description	NetPrice
#8085	Center Punch	$4.75
#8070	Bending Tool, two-sided, for .072" and .096" pins	$45.00
#8071	Bending Tool, one-sided, for .072" pins only	$35.00
#8072	Bridge Pin Setter, for .050" pins, hardened tip	$16.00
#80725	Bridge Pin Setter, for .050" pins, not hardened	$12.00
#8073	Bridge Pin Setter, for .040" pins, hardened tip	$16.00
#80735	Bridge Pin Setter, for .040" pins, not hardened	$12.00
#8074	Small Hitch Pin Setter, for .072" Pins, hardened tip	$13.00
#80745	Small Hitch Pin Setter, for .072" Pins, not hardened	$9.00
#8075	Large Hitch Pin Setter, for .096" Pins, hardened tip	$13.00
#80755	Large Hitch Pin Setter, for .096" Pins, not hardened	$9.00

Punches & Pin Setters

Pin Setters

Tuning Pin Setters

Key Mortise Punches

Oval & Round Punches