Tuning Hammers and Keys for Fortepianos

80145 Old Style Steel Tuning Key 
with tapered slot and loose sleeve. The slot must be modified by customer to fit customer’s old style fortepiano tuning pins. works on pins with T< .200" (5mm) (for definition of "T" see the left margin on the previous page). We can also perform this at our shop at additional cost (#80147).
Dim: 3.375" stem, 3.5" wide handle. 

80117 Gooseneck Tuning Hammer
with hardwood handle and hardened steel tip with an oblong hole, which fits over many flat top tuning pins used in square and grand pianos made in the second half of the 19th century. This has been discontinued. Use #801173 or #801153 below in conjuction with piano tuning hammer #80118 and #80115 on next page.

801173 Adapter Tip With Oblong Hole
Place this tip on an old style tuning pin, then use any star tipped piano tuning hammer to tune. You will have 8 positions rather than only two as with with #80117. Fits over many flat top tuning pins used in square and grand pianos made in the second half of the 19th century. Can be used with any Piano Tuning Hammers on next page.

801153 Tuning Lever Tip with Oblong Hole
Screws onto any professional piano tuning lever head like #8015 on the next page, for tuning many older grand and square pianos with old style tuning pins made in the second half of the 19th century.